bannerbar

Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Dear Daniel Tits. P02-B02-P7C9 does not work with a CSE-M53. You need to find another connector such as RDA-106BAG1A or RDA-126BAG1A. You can also use other connectors for 10/100M that contain 1:1 transformer and Center Tab (CT). Please refer to the page 6 in the document below. <a href = "http://www.eztcp.com/documents/application/an_csem32_rb1_126bag1a_xa.pdf">(datasheet of RDA-126BAG1A)</a> If you send me datasheets of RJ45 connectors what you can get in your market, I will review them. Thank you. > Daniel Tits wrote: > ------------------------------------ > Dear Sir, > > Have been using your EZL-50 product in conjunction with a P02-B02-P7C9 interface, as provided by your reseller in France. Worked fine, using the diagram as on page 11 of the EZL manual. Now I am trying to integrate a CSE-M53 onto the board, which seems straightforward. > > However, on the recommended setup, you stipulate a RDA-126BAG1A Ethernet interface (superseded by now by the RB1-126BAG1A). Your supplier however provides me with the P02-B02-P7C9 as usual. > > As such the different pin-layout does not pose problems. However, while applying the diagram on page 11 of the CSE manual, the system does not work. Also I notice that there is a substantial difference between the respective Ethernet interface modules. So from her my questions: > > Can the CSE-M53 function with the P02-B02-P7C9 module? If yes, could you please provide the correct diagram to apply. > > If not, could you please inform me where I can procure the RB1-126BAG interface modules? Or preferable, an equivalent model, but with the connection straight up, and the required LED'ss incorporated. > > Thank you very much > Best regards > Daniel >
Password

Attachment(Image, ZIP file under 2MB)