bannerbar

Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Anonymous wrote: > ------------------------------------ > > Sollae Systems wrote: > > ------------------------------------ > > > George wrote: > > > ------------------------------------ > > > > Sollae Systems wrote: > > > > ------------------------------------ > > > > > George wrote: > > > > > ------------------------------------ > > > > > Hello guys, > > > > > > > > > > my boss just bought CSW-H80 and I need to configure it. Our network is pretty simple. > > > > > Couple of computers connected to WLAN - 10.113.2.0/24, SSID VOKAP. I need all my computers to communicate with CNC device which is connected with CSW-H80. I have no idea how to configure CSW-H80 device to communicate with another computers in my network. > > > > > The goal is to send some "file" to CNC device from any computer in my network. > > > > > > > > > > Thank you very much! > > > > > > > > > > > > > Thank you for using our product. > > > > > > > > Please refer to the attached document. > > > > > > > > Ff you need any further information, please feel free to contact me > > > > > > > > > > Hello, thank you very much > > > > > > Now I´m able to ping all computers in my network but still not able to connect to AP with IP address only with RS 232. > > > I have set up static IP address from IP range of my WLAN. > > > > > > > > Please make sure that you setup correctly the following parameters: > > -SSID > > -Encryption > > -Authentication > > -Encryption > > -WPA Key > > > > If the above parameters is setup correctly, please refer to > > -Section 8.1 (page 58) and 8.2 (page 59) of User Manual http://www.eztcp.com/documents/manual/cswh80en.pdf > > -http://www.eztcp.com/en/support/view.php?page=1&cid=175 > > > > If the problem doesn'st still be solved, could you please send us snapshot of all setting on ezManager and also describe LED status on CSW-H80? This help us find out reason quickly. > > ello, > > I quess problem is wifi authentication...if I setup WLAN to WEP there is no problem but if I setup WLAN back to WPA2 PSK AES device is no longer able to connect to WLAN. > SSID, key etc is set up correctly. Do I need to upgrade firmware? Currently have 2.0A version...is newer version out? > > Thank you very much > > Regards > > G. Good morning, Firmware 2.0 is the latest version and works stably. The configuration must be the same between Access Point and CSW-H80. Could you please send us the configuration parameters on both AP and CSW-H80 (except for SSID)?
Password

Attachment(Image, ZIP file under 2MB)