Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Dear Thomas Wirths, This is a technical team of Sollae Systems. I tested an attached script. The result is OK. Please refer to the script. If you don'st solve the problem give me your script file. Thank you. > Wirths wrote: > ------------------------------------ > Dear Sir or Madame, > > I bought a CIE-M10 Gateway and updated the firmware. Everything is working to our pleasure. > > I have set up the CIE-M10 Gateway to ATC-Mode, after booting I can send ATC commands over hterm. > > I read the AT Command document which states that there are a Basic Command set and I tried them all. Only the command to switch in online mode is not working I tried: ATO<CR>; AT O<CR>; AT+O<CR> > > Also I couldn'st switch to ATC mode from online mode. > > It is important for us to check the status of the gateway from the serial interface. > > Why is it not possible for me to switch between these modes? > > Thankfully Yours, > Thomas Wirths >
Password

New file (*The above file attachment will be deleted. Image, ZIP file under 2MB)
	20161111_Script.zip