bannerbar

Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Hello To enable HTTP server on CIE-M10: - Connect CIE-M10 to your network (see section 2.1 Installation of User Manual) - Run ezManager, go to "MAC" tab, click "Search All" button, MAC and IP address of CIE-M10 should be shown, if not, check your network connection. - Click on MAC address of CIE-M10, all setting information of CIE-M10 will be shown (See Figure 2-3 of User Manual). - Goto "I/O port" tab => "Basic Setting" you will see the window (see the attached file). Check on "Web(HTTP)" checkbox to enable HTTP server - Click "Write" button to save configuration. If you cann'st still connect to webpage, please save configutation file and send us. To save configuration file, go to "Advanced Menu" on ezManager => "Export Variables" > sotiro wrote: > ------------------------------------ > Excuse me , probably you didn'st see the complete previous message : > > The problem is that the option "web(http)" is not enable.... > > All the best and whishes for a beautifull New Year > > > > Sollae Systems wrote: > > ------------------------------------ > > > > You'sre welcome! > > > > > Sotiropoulos wrote: > > > ------------------------------------ > > > Thank you for your fast answer. > > > > > > The problem is that the option "web(http)" is not enable.... > > > > > > JM > > > > > > > > > > > > > > > > Sollae Systems wrote: > > > > ------------------------------------ > > > > > > > > Thank you for using our products. > > > > > > > > To connect to the html page , please make sure that: > > > > > > > > - "Web(HTTP)" option is enable via ezManager (refer to page 47 of User Manual) > > > > - HTTP port on web browser is the same as configed port on CIE-M10 (refer to page 32 of User Manual) > > > > > > > > To change webpage, please make sure the following conditions: > > > > - CIE-M10 needs to be entered to ISP mode (refer to page 24 of User Manual) > > > > - "Web(HTTP)" option is enable via ezManager (refer to page 47 of User Manual) > > > > - Total size of your web contents(HTML files, Image files) should be lower than allowed size (80KB or 96KB, depending on your setting) > > > > Note that each time you change web contents, all of old file will be deleted. Therefore, upload all web contents at one time (send multiple file). > > > > > > > > If the problem doesn'st still be solved, please feel free to contact us. > > > > > > > > Thank you, > > > > > > > > > > > > > Sotiro wrote: > > > > > ------------------------------------ > > > > > Dear, > > > > > > > > > > I try to use a CIE-M10 module (last or older firmware, same result). > > > > > First : Impossible to connect to the html page > > > > > Second : Impossible to change this page if I select "changeF/W" > > > > > > > > > > Note : the ping on the IP of the module is OK > > > > > > > > > > Is there a way??? > > > > > All the best
Password

New file (*The above file attachment will be deleted. Image, ZIP file under 2MB)
	20161227_Capture.PNG