bannerbar

Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Hello, We are sorry but we do NOT know any display that works with CIE-M10 directly. We only focus on converting data between serial and Ethernet/Wi-Fi, not the specific end-user applications. To communicate with multiple devices using a single Serial port, please use other RS-485/RS422 modules such as CSE-M73A and CSE-B63N2. > Anonymous wrote: > ------------------------------------ > Hello, Do you have a display reference that works with the CIE-M10 directly. i iwant to know if you plug 2 devices that uses serial communication, on the same pins and use a switch to balance between the two devices, will it work, knowing that data transmeted from the 2 devices doesn'st have the same format. thank you. best regards. > Sollae Systems wrote: > ------------------------------------ > Dear Sir/Madam. No, CIE-M10 only supports digital input/output, analog input, UART. It does not support SPI. For SPI, Please use the programable module, P4M-400. For pin map, you can find it on the product'ss User Manual. Best regards, > Anonymous wrote: > ------------------------------------ > Thank you for your reply, With the CIE-M10, can i control a touchscreen, that communicates through SPI, knowing that the display function communicate through SPI, also the touch function. Following the touchscreen module that i want to use https://www.waveshare.com/product/3.5inch-rpi-lcd-b.htm Does the CIE-M10 has those ports? Can you send me the pins map of the CIE-M10? Thank you. Best regards. > Sollae Systems wrote: > ------------------------------------ > Hello again, Firstly, if you want to convert data and display data at the same time, you can program for P4M-400 to realize both functions. Secondly, We would like to confirm that Serial port on CIE-M10/CIE-M10A has TTL voltage level, digital input/output has 3.3V CMOS logic level. Best regards, > Anonymous wrote: > ------------------------------------ > Thank you, I want at the same time that the module converts data from serial to Ethernet. I have found the CIE-M10. Please confirm that it has pin out, and if the CIE-M10 has a TTL input. Thank you. Best regards. > Sollae Systems wrote: > ------------------------------------ > Hello, This is Sollae Systems'ssss Technical Support Team. Thank you for your interest in our products. Regarding your question, the CSE-M73 is NOT programmable. It is only used for converting serial data to UDP/TCP and vice versa. We would recommend you to use our programable module named P4M-400. You can program for P4M-400 using PHPoC language, which is similar to PHP. What you wish to do in your application can be done by using P4M-400. For more information about P4M-400, you can refer to: <a href="https://www.phpoc.com/p4m-400.php">https://www.phpoc.com/p4m-400.php</a> I hope the above is useful to you. Please feel free to contact me if you need any further information. > Anonymous wrote: > ------------------------------------ > Hello, i would like to know if the CSE-M73 can control a display module. in another way, is the CSE-M73 programmable, because i want to display data received via ethernet with a simple display module that will be pluged on the CSE-M73 converter. Best regards.
Password

Attachment(Image, ZIP file under 2MB)