Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Hello, I hope you can help me with the follow: I am a farmer from Holland. We want with two convertors CSE-H55N2 connect two feedig boxes together. I found out that the communication between the boxes is not Can-Bus but Differential Manchester encoding, ALCOM bus the call, also like RS485. This is what I found about that protocol: Capacity : 62.5 kBaud Signal Levels : Tx 5.0 V p-p .. Rx 0.3 V Max Bus length : 1000 metres Cable Type : 2 x 1.5 mm2, twisted pair. In this link there is a discussion with someone else who has the same connection: https://electronics.stackexchange.com/questions/476481/hardware-software-needed-to-decode-differential-manchester https://electronics.stackexchange.com/questions/476121/decoding-an-unknown-serial-bitstream-that-does-not-fit-8-n-1 Can we config the CSE-H55N2 so I can communicate between the feeding boxes with this protocol. It would be great to realize this! Thanks. With best Regards, Jack Konijn The Netherlands Mobille +31 651906422
Password

New file (*The above file attachment will be deleted. Image, ZIP file under 2MB)
	20211115_6sqV2.png