Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Hello. When EZL-50L is connected with Ethernet (or another network device), its LINK LED is turned on. Surely, to search and access to EZL-50L, the LINK LED should be ON. The problem may have chance to occur by using wrong type of Ethernet cable. If you want to connect EZL-50L with a network HUB, you should use cross Ethernet cable. However, 1:1 (or direct) Ethernet cable should be used when you connect the EZL-50L with your PC. You can refer to below post for information about the Ethernet cable. <a href="http://www.eztcp.com/en/support/view.php?page=1&cid=158" target=new> Go to the post. </a> If I'sve missed something, please let me know. Have a nice day! > Alireza wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Hello and thank for your answer > my another Ezl have problem Also. > Status Led Is Blinking at 500ms. > Link Led is Off; > Rx And Tx Led Blinking together. > Hub Identify the module But Ezconfig can not connect to module. > please Help Me.
Password

Attachment(Image, ZIP file under 2MB)