Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Thanks. updating the driver solved the problem with the abortion of the connection. Unfortunately, after a restart it'ss not possible to connect again, the SSID isn'st visible either. > Sollae Systems wrote: > ------------------------------------ > Does 'sNet isn'st visible and the connection is aborted's mean that the SSID of EZL-80c does not connect on your PC? > > In this case, you have to check your PC as follows. > > 1. Even though all the parameters are correct, if you couldn’t get the ad-hoc link with our products, please check that your devices’ Wi-Fi adapter. > Please check the link, too. > http://blog.eztcp.com/ensollae/54 > 2. if you test at one channel, please test at another channel. It change on ezSerialConfig. > > If you have another questions, feel free to contact us. > Have a nice day. > Thank you. > > > > Dane wrote: > > ------------------------------------ > > I use a EZL-80c module and create an SSID in AdHoc Mode. > > This is possible but after a few seconds, the net isn'st visible anymore and the connection is aborted. After this happend, a restart nor reset makes the network visible again and it`s not possible to establish a connection. However, after a few hours without supply the net is visible. but only for a few seconds. > > i tried different settings and modes, but without success. > > > > can anybody help me?
Password

Attachment(Image, ZIP file under 2MB)