Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
When you see the message, reboot the CSW-B85. Then it will be in the Serial Configuration Mode automatically. In Serial Configuration Mode, the 4 LEDs(STS, LINK, RXD, TXD) will blink. For your information, there are other ways to change into the Serial Configuration Mode. 1. Using J1 Short the pin #2 and pin #3 under 1 second. 2. Using J2 Short the pin #1 (C) and the pin #2 (N). If you have any further question, feel free to contact us, anytime. Thank you. > Gabriel wrote: > ------------------------------------ > I tried to set my CSW_B85 through a serial cable and the EzManager sends the following message: > > WLAN: please, rebbot the product > > ETHERNET: try again after changing operation mode of the product to serial configaration mode > > How I'sm in serial configuration mode? >
Password

Attachment(Image, ZIP file under 2MB)