bannerbar

Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
Hello You understood well. In my configuration, I have a CIE M10 which pilot a pump (output). This module is behind an adsl router. In this router is configured the DDNS (No-IP.org). Perhaps it is not necessary to configure the DDNS in the module. What communication mode is ok in my case: cod, t2s, u2s... Master or slave and passive or active connection. Thank you Have a nice day > Sollae Systems wrote: > ------------------------------------ > I don'st understand your problem exactly. > > But I think that you might want to access in order to configure the CIE-M10 from the other network with DNS/DDNS service. > When the CIE-M10 IP address is dynamic you should use DDNS service in this case. > > You can access the CIE-M10 in the IP tab by inputting the hostname(or IP address) of the CIE-M10 and port number UDP 50005 by the ezManager. > > If I misunderstand your question, please let me know and describe more precisely. > > Have a nice day. > > > laurent wrote: > > ------------------------------------ > > Hello > > I want to manage a CIE M10 through internet but it doesn'st work. I have a domain name and I use the port number 80. When I use TCP ezmanager, on the page IP I put my domain name in the "local IP address" with the 50005 port a window appears with the public IP address and nothing else. An other window tell me that the module is unreachable. My firewall is disable. Is there a particular port to use or a special configuration on ezmanager to manage my module. > > Thanks
Password

Attachment(Image, ZIP file under 2MB)