Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Dear Pao Unfortunately, all ezTCP products including CSE-H53N ONLY supports the feature [Allowed IP Range] that I mentioned at my previous response. I am sorry we are not be able to meet your requirement. If you require assistance, please feel free to contact us anytime. Thank you > Pao wrote: > ------------------------------------ > Dear Andy Lee, thanks for your support > > I need to allow in the device, only two IP addresses or two identifications, eg > > 10.11.12.50 or 10.11.12.0 > 192.168.1.50 or 192.168.1.0 > > In other words, sometimes I Connecto to the device from 10.11.12.0 and sometimes from 192.168.1.0. Other IP or ID should be blocked. > > Is this possible? > > They have a model that supports this feature? > > Thanks > > > Sollae Systems wrote: > > ------------------------------------ > > Dear Pao > > > > Actually I need your network ID, NOT "subnet ID". > > I am sorry to my previous reply made this confuse. > > > > For example, I assumed the IP address of your local PC is 192.168.0.x > > (we already know the subnet mask is 255.255.255.0). > > Then your local network'ss network ID is "192.168.0.0". > > > > Now you can set the [Allowed IP Range] option like the below. > > > > <img src="../../images/qna_1274_01.png" width="400" height="180" alt="" /> > > > > As the above image shows, CSE-H53N only accepts connection request from "192.168.0.1 ~ 192.168.0.255" IP range. > > > > Thank you. > > > > > Pao wrote: > > > ------------------------------------ > > > Dear Andy Lee > > > I appreciate your support > > > > > > The subnet on my LAN is 255.255.255.0 > > > > > > Thanks > > > > > > > Sollae Systems wrote: > > > > ------------------------------------ > > > > Dear Pao > > > > > > > > This is Andy Lee with Support Team. > > > > > > > > Unfortunately, there is NO feature to set filtered IP addresses. > > > > But you can set the allowed IP address range. > > > > > > > > (if all peer hosts are located in your local network), depending on your local subnet ID, you may make what you want with [Allowed IP Range] option. > > > > > > > > I would like you to give me the subnet ID of your local network, then I will give you the tip for your request. > > > > > > > > Thank you. > > > > > > > > Any Lee (swlee@ezTCP.com) > > > > > > > > > Pao wrote: > > > > > ------------------------------------ > > > > > Hi, i need to filter more of one IP address, for example: > > > > > > > > > > 10.11.12.50 > > > > > 192.168.1.50 > > > > > > > > > > Is this posible? > > > > > > > > > > I'sm using CSE-H53N, firmware 1.0E, ezTCP Manager v3.2E > > > > > > > > > > Thanks in advance
Password	Security Code

Attachment(Image, ZIP file under 2MB)