Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Based on your test result, the internal ENV block of CSW-M85 seems to be damaged. Unfortunately, there is no way to restore damaged ENV block so you need to replace the board to another one. If you purchased it from EL micro, our partner in Germen, you can ask them about it. I am sorry for your inconveniences. > xray1981 wrote: > ------------------------------------ > Now I've measured between N and C: When there is no current on the CSW-B85 board then the resistance between N and C is 3.2 Ohm, when the module is powered on, then the resistance is 35 Ohm. So there is still a connection. > The only connection I've left to the board is a 5V power supply. > Could it be that a transistor or something is broken? > > > xray1981 wrote: > > ------------------------------------ > > Hello, > > thank ou for the fast response. > > I've ckecked it and there is no connection between C-N or J1 1-2. > > > > > Sollae Systems wrote: > > > ------------------------------------ > > > Hello. > > > This is support team of Sollae Systems. > > > Thank you for the detailed information. > > > According to your explanation, your module was definitely in serial configuration mode. > > > CSW-B85 enters to the mode when pin #1(C) and #2(N) of J2 keeps to be connected each other or pin #1 and #2 of J1 are connected at a moment. > > > Could you please check if there is any chance to be made the above situations? > > > Thank you. > > > > > > > xray1981 wrote: > > > > ------------------------------------ > > > > Hello > > > > I've got a problem with my csw-m85 and csw-b85. It has worked well for months but from one day to another i couldn't find the ssid. The only SSID I can see is the cfg_MAC. I have tried to get into the normal mode, but it failed. I also updated to the latest firmware and did a factory reset, but nothing has helped. When turning on, the LED D1 stays on for 2 seconds, then it switches off and the LEDs STS, Link, RxD and TxD are blinking. The connection via Web or ezManager was successful. I'm sending you a screenshot from the status. > > > > What can I do? > > > >
Password	Security Code

Attachment(Image, ZIP file under 2MB)