Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Anonymous wrote: > ------------------------------------ > > Sollae Systems wrote: > ------------------------------------ > > Anonymous wrote: > > ------------------------------------ > > > Sollae Systems wrote: > > > ------------------------------------ > > > > Anonymous wrote: > > > > ------------------------------------ > > > > > Sollae Systems wrote: > > > > > ------------------------------------ > > > > > > George wrote: > > > > > > ------------------------------------ > > > > > > > Sollae Systems wrote: > > > > > > > ------------------------------------ > > > > > > > > George wrote: > > > > > > > > ------------------------------------ > > > > > > > > Hello guys, > > > > > > > > > > > > > > > > my boss just bought CSW-H80 and I need to configure it. Our network is pretty simple. > > > > > > > > Couple of computers connected to WLAN - 10.113.2.0/24, SSID VOKAP. I need all my computers to communicate with CNC device which is connected with CSW-H80. I have no idea how to configure CSW-H80 device to communicate with another computers in my network. > > > > > > > > The goal is to send some "file" to CNC device from any computer in my network. > > > > > > > > > > > > > > > > Thank you very much! > > > > > > > > > > > > > > > > > > > > > > Thank you for using our product. > > > > > > > > > > > > > > Please refer to the attached document. > > > > > > > > > > > > > > Ff you need any further information, please feel free to contact me > > > > > > > > > > > > > > > > > > > Hello, thank you very much > > > > > > > > > > > > Now I´m able to ping all computers in my network but still not able to connect to AP with IP address only with RS 232. > > > > > > I have set up static IP address from IP range of my WLAN. > > > > > > > > > > > > > > > > > > > > Please make sure that you setup correctly the following parameters: > > > > > -SSID > > > > > -Encryption > > > > > -Authentication > > > > > -Encryption > > > > > -WPA Key > > > > > > > > > > If the above parameters is setup correctly, please refer to > > > > > -Section 8.1 (page 58) and 8.2 (page 59) of User Manual http://www.eztcp.com/documents/manual/cswh80en.pdf > > > > > -http://www.eztcp.com/en/support/view.php?page=1&cid=175 > > > > > > > > > > If the problem doesn't still be solved, could you please send us snapshot of all setting on ezManager and also describe LED status on CSW-H80? This help us find out reason quickly. > > > > > > > > ello, > > > > > > > > I quess problem is wifi authentication...if I setup WLAN to WEP there is no problem but if I setup WLAN back to WPA2 PSK AES device is no longer able to connect to WLAN. > > > > SSID, key etc is set up correctly. Do I need to upgrade firmware? Currently have 2.0A version...is newer version out? > > > > > > > > Thank you very much > > > > > > > > Regards > > > > > > > > G. > > > > > > Good morning, > > > > > > Firmware 2.0 is the latest version and works stably. > > > > > > The configuration must be the same between Access Point and CSW-H80. > > > > > > Could you please send us the configuration parameters on both AP and CSW-H80 (except for SSID)? > > > > Hello, here is setting of both devices: > > > > CSW-H80 > > SSID VOKQUEST > > Authenticatio: WPA2 PSK > > Encryption: AES > > IP address is obtained automatically > > > > AP settings is pretty much same > > subnet 10.1.130.0/24 > > Thank you very much for your cooperation. > > Sorry we have not found out reason why CSW0H80 can't connect to your AP. > > Could you please send us AP model name and firmware version, then we can test this symptom by ourselves after buying this AP. > > Once finishing the test, we will inform you. > > Thank you again! Model: CSW-H80 Firmware: 2.0A
Password	Security Code

Attachment(Image, ZIP file under 2MB)