Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Joaquin Juarez wrote: > ------------------------------------ > Hello, Thank you for your fast response. My goal is to see if I can communicate directly to the module using a PLC. -Architecture: Network Card 1756-EN2T (Ethernet/IP) connected to the CSE-M53N (Through a switch). System does not have a serial port. -Find the settings in the attached PDF. -I do not use any PC to transfer the data. I would be looking to do it with the PC. Now I might be jumping ahead, but in case my approach is wrong, would I need to do something like the following?: PLC --> PC (Running OPC Server and ezVSP) --> CSE-M53N Best regards Joaquin Juarez > Sollae Systems wrote: > ------------------------------------ > Hello Joaquin Juarez, > > Thank you for using our product. > > In order to find out the issue, could you please describe detail about: > - Your system architecture > - Setting of Serial Device > - Setting on CSE-M53 (network and serial setting) > - Which software do you use on PC to transfer data > ? > > Thank you, > Best regards, > > > > Joaquin Juarez wrote: > > ------------------------------------ > > Hello, > > > > I have a Display that makes use of the CSE-M53N, connected to a local network over ethernet. > > > > I have not been able to connect the PLC to this communication module. I am wondering if you have any prior example I could use. > > > > Best Regards
Password	Security Code

Attachment(Image, ZIP file under 2MB)