Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Dear Joaquin Juarez, Thank you for your information I am not clear about your network architecture. If i am correct, it should be: <b>PLC</b> <----Serial-----> <b>CSE-M53N</b> <-----TCP/IP-----> <b>PC (</b>----TCP/IP---> <b>ezVSP </b><----Virtual Serial---> <b>OPC Server )</b> If so, you need to establish TCP connection between ezVSP and CSE-M53N. Could you please send us the configuration of TCP connection on ezVSP? If possible, we can do a remote support via a remote software, which is similar to TeamViewer. If possible, please contact us via email support@eztcp.com. Our working time is from 9:00AM to 6:00PM (GMT+9) > Joaquin Juarez wrote: > ------------------------------------ > > Hello, > > Thank you for your fast response. > > My goal is to see if I can communicate directly to the module using a PLC. > > -Architecture: > Network Card 1756-EN2T (Ethernet/IP) connected to the CSE-M53N (Through a switch). > System does not have a serial port. > > -Find the settings in the attached PDF. > > -I do not use any PC to transfer the data. I would be looking to do it with the PC. > > Now I might be jumping ahead, but in case my approach is wrong, would I need to do something like the following?: > PLC --> PC (Running OPC Server and ezVSP) --> CSE-M53N > > Best regards > Joaquin Juarez > > > Sollae Systems wrote: > > ------------------------------------ > > Hello Joaquin Juarez, > > > > Thank you for using our product. > > > > In order to find out the issue, could you please describe detail about: > > - Your system architecture > > - Setting of Serial Device > > - Setting on CSE-M53 (network and serial setting) > > - Which software do you use on PC to transfer data > > ? > > > > Thank you, > > Best regards, > > > > > > > Joaquin Juarez wrote: > > > ------------------------------------ > > > Hello, > > > > > > I have a Display that makes use of the CSE-M53N, connected to a local network over ethernet. > > > > > > I have not been able to connect the PLC to this communication module. I am wondering if you have any prior example I could use. > > > > > > Best Regards
Password	Security Code

Attachment(Image, ZIP file under 2MB)