Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Dear Marco Montorsi, In order to use AT command, firstly, EZL 70 must be set to "AT Command - ATC" mode. Did you set the EZL 70's communication mode to "AT Command - ATC" mode? If not, please set it via ezConfig. And please note that the AT command should be sent via Serial Interface (COM port). It is not a TCP protocol > Marco Montorsi wrote: > ------------------------------------ > The issue was due to a bad power supply, which wasn't giving 5V but a little bit less, thank you for your response, now i have the problem to command the EZL 70, when i try to use AT command it doesn't work; First of all i create a telnet connection and the yellow led stays on, so i am sure the connection is established, from what i read i should use the command AT+PSE with final '<CR>', to switch to command state, but when i give this command in input, the EZl 70 doesn't return nothing, i can't quite understand the switch between command state and online state, Thanks, MM
Password	Security Code

Attachment(Image, ZIP file under 2MB)