Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Moritz Seelos wrote: > ------------------------------------ > Hello, thank you for the fast answer. to your questions: Does it require Wi-Fi reconnection when you start connecting the laptop to the CSW-H85N? Yes, when I connect to the Wifi of the CSW-H85N I just have around 10 seconds to change settings etc. and then the connection is lost again. Does this issue happen sometimes, or frequently? Yes it happens more or less every time. For testing, we suggest you clear all the physical obstructions between your CSW-H85N to your laptop, keep the distance short, and see if the issue is still there. That is the case. Could you please describe the system LED status when the issue occurs? The green LINK LED is ON, the yellow STS LED blinks in every second and of course the red PWR LED is also ON. When I try to connect, for about one second all LEDs are ON (also the TXD and RXD) and then it goes back to the described pattern. Also, make sure you provide a stable power supply to CSW-H85N. As I can see we have a stable power supply. If possible, could you please try to use Infrastructure Mode for the Wi-Fi connection (see page 14, CSW-H85N User Manual), and see if the issue still happens? This is a bit more difficult for us, but I'll see if we can do that. regards, Moritz > Sollae Systems wrote: > ------------------------------------ > Dear Moritz Seelos, Thank you for the inquiry. If we understand it rightly, the working scenario would be: Motor <-Serial(RS232)-> CSW-H85N <-Wi-Fi-> ezVSP (installed on your laptop) <-> Motor control software (installed on your laptop) We would like to confirm that you are having a problem with the Wi-Fi connection from your laptop to your CSW-H85N. Does it require Wi-Fi reconnection when you start connecting the laptop to the CSW-H85N? Does this issue happen sometimes, or frequently? For testing, we suggest you clear all the physical obstructions between your CSW-H85N to your laptop, keep the distance short, and see if the issue is still there. We do not find anything wrong with the settings you sent. Could you please describe the system LED status when the issue occurs? You can refer to page 12, CSW-H85N User Manual, for more information about LED indicators: https://www.eztcp.com/en/download/pds_files/cswh85nen.pdf Also, make sure you provide a stable power supply to CSW-H85N. If possible, could you please try to use Infrastructure Mode for the Wi-Fi connection (see page 14, CSW-H85N User Manual), and see if the issue still happens? Thank you for your understanding. Best Regards > Moritz Seelos wrote: > ------------------------------------ > We want to connect one of our Motors over RS232 with your CSW-H85N. Then we want to connect a Laptop via Wifi and with the help of a virtual port (ezVSP) we want to control the Motor. Now the problem is that if I want to connect my Laptop to the CSW-H85N I just have a connection for a few seconds then I'sm disconnected and have to reconnect to the wifi. Is anything wrong with the settings? (see attached)
Password	Security Code

Attachment(Image, ZIP file under 2MB)