Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Dear Mohamed Ali, Thank you for the inquiry. To establish correlation between the Digital Input SIG-5440 and Digital Output SIG-5450, we recommend using the "Internet Switch" feature available with SIG-5xx0 series. This feature allows the transfer of input information through the TCP/IP network, enabling the activation of the correlated output. In this operational mode, the devices establish direct interaction, and you will not need to use ModMap. Here are the steps to configure your devices: Step 1) Connect SIG-5440 and SIG-5450 using spFinder. Step 2) Enable the "Multiple Connection" option on both devices. Step 3) Configure the devices with the following sample parameters: Model \|SIG-5440 \| SIG-5450 IP Address \|192.168.0.40 \| 192.168.0.50 Modbus Type \|Slave \| Master Connection Mode \|TCP Server \| TCP Client Peer Address \|- \| 192.168.0.40 Port \|502 \| 502 Note that, the above IP addresses are just for demonstration. You may need to set them up based on your network infrastructure. Make sure the IP addresses are reachable between the devices. We hope the above is helpful to you. Please feel free to reach us if you need support. Best Regards > MOHAMED ALI wrote: > ------------------------------------ > Dear Sir, Kindly We Need your Support For Making Correlation Between the Digital Input SIG-5440 and the Digital output SIG-5450 We need once We Activate the Input in the SIG-5440 ,the Correlated Output in SIG-5450 Should Active We Already Commission it and used the MODMAP but we Cannot Find away to correlate Between the Output and the Input Both Devices in same VLAN (NEWORK)
Password	Security Code

Attachment(Image, ZIP file under 2MB)