Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > To test the passive connection, do as following example: [EZL-80c] Local IP Address: 10.1.0.1 Subnet Mask: 255.0.0.0 [Host(PC)] Local IP Address: 10.1.0.2 Subnet Mask: 255.0.0.0 [Example] at+plp=1470[CR] ---------to EZL-80c's serial port--------- OK[CR][LF] ---------From EZL-80c's serial port--------- ata[CR] ---------to EZL-80c's serial port--------- (EZL-80c listen TCP connection from port 1470) (There is a connection from the Host(PC).) (telnet 10.1.0.1 1470 in the command prompt) CONNECT[CR][LF] ---------now TCP connection is established--------- (bidirectional communcation) > jason wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > I wanna to use the EZL-80C.It has four differents mode.I will use the ATC mode. > the ATC mode has active connection and passive connection.How can i use the passive connection. > why doesn't the transmission data "ata" connect ?
Password	Security Code

Attachment(Image, ZIP file under 2MB)