Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > 1. We didn't test EZL-80c with SDWCFB-128. Please use it after testing. 2. Change ezTCP Mode to ATC(1). And set serial port parameters as same as EZL-80c. If all are OK, NO CARRIER will be displayed when EZL-80c boot up. Then send at commands. (The protocol is written in the manual) > Mohammed Maly wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 1-can we test the EZL80c with Sandisk(SDWCFB-128) CF card? > 2-how we can send ATC from hyper terminal to EZL89C Board? >
Password	Security Code

Attachment(Image, ZIP file under 2MB)