Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Dear, I'sm sorry, but I didn'st understand you system. Can you explain that in detail? If you use the CIE-H10 as a serial device server, the system will be formed like this [Serial Device]-----(RS232)-----[CIE-H10]-----(LAN)------[ezVSP in PC)] In this system, a Port of ezVSP and CIE-H10 has to be connected on TCP/IP. That means if the CIE-H10 is being operated as client (COD mode), ezVSP should be a TCP server. And the peer port of CIE-H10 should be set to your PC'ss IP address. The ezManager let you do that. In addition, the serial port parameters (baud rate, stop bit, data bit and parity bit) which are shown on ezVSP depend on your terminal program. Please check the status of you program. Let me know if you can'st carry on or understand anything in above. And here is download links of newest version of ezVSP and ezManager. Try to use those programs. <a href = "http://www.eztcp.com/utilities/ezVSP.zip"> ezVSP_3.2A</a> <a href="http://www.eztcp.com/utilities/ezManager.zip">ezManager_3.1E</a> Thank you. Best Regards, > Stephane wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Hello > > I try to make a communication between a CIE-H10 and a PIC (16F870) > > I created a virtual port and i try to send (and receive) datas from my PIC to the CIE-H10... > > I followed the ezVSP User'ss Manual > ( Version 2.2c ) > > I use profilab-expert 4.0 > > My pic is configurated 9600 bauds, 8 bits > > CIE : Telnet, TCP Client, Remote Port 1479 > > Is this configuration possible ??... > > > When I start (open the PORT - COM5) it indicate 115200-8-None-1 > My PIC cannot go this speed... > > Can you help me please ? > > Thanks > Stephane-FRANCE
Password	Security Code

Attachment(Image, ZIP file under 2MB)