Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Hello, Before I talk about the problem with EZL-70, I’d like to say sorry for my mistake on the previous answer. The point is that the CSE-M73 let you send the DNS query in ATC mode. I’ve modified the answer, so please check it again. I think the network connection has no problem because ethereal have captured the packet transmitted between EZL-70 and the server. Can you send the file from the ethereal when the connection is failed please? Our technical support team’s e-mail address is support@eztcp.com If you do that, it may help us to find out the reason. And let us know about the version of Firmware. For your information, the latest released version is 1.2A There is another question. Did you mean that the same access is possible when the mode is COD? I think if the environments of ATC and COD mode are the same, the connection should be possible irrespective of the modes I will look forward to receive your e-mail. Thank you in advance. Have a nice day, > Altmann wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > additional to my request 517 (one week ago) > now I tried to connect the EZL via ATC-mode to a apach-server in the same network area with following result: > After I put the ATDT-command via RS232 to the EZL it aswered "NO CARRIER". > Then I sniffs the TCP messages with the > ethereal-tool on the server side: > the 1. TCP-step, request from EZL: > IP, Port all OK SYN=1 > the 2. TCP-step, respons from apach: > same all OK ACK=1/SYN=1 > ACK-No.=1 > but in the 3. Tcp-step from EZL: > ACK=1/RST=1 and ACK-No.=3501708736 > > then the EZL sends a 4. message with > ACK=1/RST=1 and ACK-No.=1 > > result is: not connected > > The same result I get if I try to connect to an external server. The ethereal-sniff shows for the 1. and 3. TCP-steps the same. > > In COD-mode with fixed peer-IP in the EZL the connection is established well. > But I can not change the peer-IP via serial. > > I hope you can help me
Password	Security Code

Attachment(Image, ZIP file under 2MB)