Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Hello. You can drop all the data, which had received from RS232 port before the connection is established, by using an option. The option'ss name is <Drop SIO RX Data>. <img src="../../images/70_drop_buffer.png" width="550" alt=""> If you activate this option, ezTCP won'st send the serial data to the remote host. This option is only for the TCP client mode and available only under condition that the <Event Byte> parameter is set to zero. If the option is not available, please check your firmware version. 1.2C or subsequent versions are available. Have a nice day! > nonde wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Hi > We have an EZL70 device connected to an RS232serial device. EZL70 works as a TCP client CODs Serial line settings are: 9600,8,N,1,None. It seems that the EZL 70 holds a memory buffer and store messages from the serial line. > The case is as follows : > When EZL 70 is not connected to the TCP server (server is down) it stores an amount of data to its buffer and forwards them to the TCP server when it gets connected to the server. > Because of the buffer length some of these messages are delivered truncated. > We need to eliminate the EZL 70 buffer feature. > In other words when EZL 70 is not connected to the TCP server whatever comes to its serialline should be omitted and ignored. > How could we accomplish this? > Is there any parameter that we should use? > > Thanks a lot > > Regards
Password	Security Code

Attachment(Image, ZIP file under 2MB)