Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > Hello. This is a technical support team of Sollae Systems. When you did the simple test with PC, There is not have any problem to trasmit data from LAN to Serial. (Can you see the result(0~7) of no. 11~12 (not no.10) of Figure 2-7 ?) But when you try to do again with your serial device, it doesn't work. Does it mean it works well with PC and doesn't work with your serial device? If it is right, problem is a serial cabling. (TX - RX) (RX - TX) (GND - GND) Please check it. And hardware manager will come back tomorrow. So After he come back, I will tell you about your CCT. Have a good day. Thank you. > S.Pongsathon wrote: > ------------------------------------ > yeah i use serial port in PC , i check and simple test CSEM-53 has been complete, > > all LEDs lighting, chip can be able connect normally, work as well follow > > manualCSEM-53. i try ping in command window. it can be done.. but still can't > > transmit data from UTP to serial. ,So i am attachment CCT diagram too.in The > > ISP leg, i use swich 3 ea. for switching between each mode.So voltage while > > switching HIGH&LOW states 3.3/0v . > > help me pls. > > Thanks Sollae System tech. team > > > > Sollae Systems wrote: > > ------------------------------------ > > Hello. > > > > This is a technical support team of Sollae Systems. > > > > First of all, I think you would better check your cct. > > > > If you get a evoluation board, It will be easy to find a problem. > > If not, I recommend you do a simple test of CSE-M53. > > > > I think you did already. But you can use a serial port of PC instead of your serial device. > > > > The PC has to be connected Though both serial and LAN. > > > > Please refer to 15page of manual about how to test. > > <a href="http://www.sollae.co.kr/documents/manual/csem53en.pdf" target="new"> Manual Download</a> > > > > If serial data can'st transmit to TCP or TCP data can'st taransmit to Serial, > > You need to check your cct. If you can give us your CCT diagram, we can check your problem. > > > > And about Q2, "Established" means TCP is connected. So you don'st need to worry about it.(it means it is not a TCP connection problem, it is a serial problem ) > > > > If you have any questions, feel free to contact us again. > > > > Thank you. > > > > > > > S.Pongsathon wrote: > > > ------------------------------------ > > > I bought CSE-M53 only chip (no evolution board). Then i make cct follow evolution board for my project. in cct have CSE-M53 + Max232 .After that i use ezTCPmanager control data transmit in cct > > > Q1. > > > So, i can transmit data from rs232 to TCP/IP (01234567 no problem RS232 can recieve data and is captured from ocsiloscope) but TCP/IP to serials it doesn'st work. LED is lighting normally follow CSE-M53manual. Why? > > > > > > > > > Q2. > > > connectionTCP/IP :tty>>>Listen >> in simple test page TCP is connected 1417 > > > :COM1>Established > > > i dont know this sentence does mean? this involve to Q1? > > > > > > > > > i read FAQ No.286 (ezTCP doesn'st work) all and repeat,repeat but it cant solve my Q. > > > > > > hope to see Answer > > > Thank :) > > >
Password	Security Code

Attachment(Image, ZIP file under 2MB)