Support > Technical Support

Q&A / Technical Support

Name	E-mail

Company Name

Subject

Contents
> Sollae Systems wrote: > ------------------------------------ > To search CSE-M53, a network connection is required like a picture below. <img src="images/csem53_data_loss_00.png" width="550" height="355" alt=""/> We will test the terminal program which you used if you send us the program by e-mail. In my opinion, it seems that the products what you have are not broken because you succeeded transfer some data in ASCII. By the way, each LED indicates various status of CSE-M53, tough. Thanks, in advance. > Anonymous wrote: > ------------------------------------ > Thank you to answered. > > but i can'st search CSE-M53 with ezManager. How i should to do? Can i will transfer data from other terminal program? Or not, Can i will config CSE-M53 without ezManager? > > Is possibly CSE-M53 out of order(be broken)?, although LED status (TCP connection,Link,3.3V status )are still brighting. > > > > > > Sollae Systems wrote: > > ------------------------------------ > > Hi. > > > > Which program do you use? > > > > I tested sending a word file (.docx) with some terminal programs (Teraterm and Realterm) but I could not find anything wrong. It worked fine. > > > > As you know, CSE-M53 just passes data from serial (UART) to network (TCP/IP) and vice versa. This module doesn'sst care what the data type is. > > > > Could you please check sizes of the sent and received data below? > > 1. Serial RX of M53#1(Sender) > > 2. Network TX of M53#1 > > 3. Network RX of M53#2(Receiver) > > 4. Serial TX of M53#2 > > > > All of above sizes should be the same in normal. > > > > You can show them in the status window by clicking [Status] button of ezManager. > > > > If you take and send some screenshots by e-mail, it may be helpful to us. > > E-mail: support@sollae.co.kr > > > > About the last question(router thing), I am sorry but I cannot understand what you mean. > > Could you please explain it again in detail? > > I am sorry for your inconvenience. > > > > Have a nice day. > > > > > > > Anonymous wrote: > > > ------------------------------------ > > > > > > > > > > Pongsathon wrote: > > > > ------------------------------------ > > > > we want sending any file(such as .doc, .jpg, .png) across COM to COM using 2 CSE-M53. now, we had 2 CSE-M53 connect togather between 2 com in attract picture. > > > > > > > > we config IP CSE-M53 in same subnets then try sending ASCII alphabet&number in simple test, it'sss work. we loading file form COM by LOAD button and sent that flie through ,same number sending but doesn'sst work. why? > > > > > > > > If should we sending file is .bin .txt? > > > > If we replace COM1 into router which is connected internet. What COM2 will connected internet too? > > > > answer us,Please.
Password	Security Code

Attachment(Image, ZIP file under 2MB)