한국어
|
English
PRODUCTS
SOLUTIONS
APPLICATIONS
SUPPORT
DOWNLOAD
WHERE TO BUY
ABOUT US
Support
>
Technical Support
Q&A
/ Technical Support
Name
E-mail
Company Name
Subject
Contents
> Anonymous wrote: > ------------------------------------ > Thank Your method really good for us , but i have a new problem again , i can search m53 by ezManager ,can config ,but i doing test transferred data from M53 to M53 fails. Then I use oscilloscope try to captured Tx signal (leg 15th in M53 compare with GND ) ,It's really silence (without pulse signals) although LED status are still brighting. Why? In case, Is product broken? Thanks for help thoroughly. > Sollae Systems wrote: > ------------------------------------ > To search CSE-M53, a network connection is required like a picture below. > >
> > We will test the terminal program which you used if you send us the program by e-mail. > > In my opinion, it seems that the products what you have are not broken because you succeeded transfer some data in ASCII. > By the way, each LED indicates various status of CSE-M53, tough. > > Thanks, in advance. > > > > Anonymous wrote: > > ------------------------------------ > > Thank you to answered. > > > > but i can'st search CSE-M53 with ezManager. How i should to do? Can i will transfer data from other terminal program? Or not, Can i will config CSE-M53 without ezManager? > > > > Is possibly CSE-M53 out of order(be broken)?, although LED status (TCP connection,Link,3.3V status )are still brighting. > > > > > > > > > > > Sollae Systems wrote: > > > ------------------------------------ > > > Hi. > > > > > > Which program do you use? > > > > > > I tested sending a word file (.docx) with some terminal programs (Teraterm and Realterm) but I could not find anything wrong. It worked fine. > > > > > > As you know, CSE-M53 just passes data from serial (UART) to network (TCP/IP) and vice versa. This module doesn'sst care what the data type is. > > > > > > Could you please check sizes of the sent and received data below? > > > 1. Serial RX of M53#1(Sender) > > > 2. Network TX of M53#1 > > > 3. Network RX of M53#2(Receiver) > > > 4. Serial TX of M53#2 > > > > > > All of above sizes should be the same in normal. > > > > > > You can show them in the status window by clicking [Status] button of ezManager. > > > > > > If you take and send some screenshots by e-mail, it may be helpful to us. > > > E-mail: support@sollae.co.kr > > > > > > About the last question(router thing), I am sorry but I cannot understand what you mean. > > > Could you please explain it again in detail? > > > I am sorry for your inconvenience. > > > > > > Have a nice day. > > > > > > > > > > Anonymous wrote: > > > > ------------------------------------ > > > > > > > > > > > > > Pongsathon wrote: > > > > > ------------------------------------ > > > > > we want sending any file(such as .doc, .jpg, .png) across COM to COM using 2 CSE-M53. now, we had 2 CSE-M53 connect togather between 2 com in attract picture. > > > > > > > > > > we config IP CSE-M53 in same subnets then try sending ASCII alphabet&number in simple test, it'sss work. we loading file form COM by LOAD button and sent that flie through ,same number sending but doesn'sst work. why? > > > > > > > > > > If should we sending file is .bin .txt? > > > > > If we replace COM1 into router which is connected internet. What COM2 will connected internet too? > > > > > answer us,Please.
Password
Security Code
Attachment
(Image, ZIP file under 2MB)
Notice
Technical Support
FAQ
Q&A
Customer Support
Sales & Quotation
Survey