한국어 English Chinese Russian
bannerbar
Support > Technical Support

Q&A



Your information is protected by SSL.
No. 1460 Re: Re: Serial tunnel using ezTCP 2017-01-03

Dear Khanh,

Thanks a lot for your information.
I could connect and communicate both PC throw a serial line with two CSE-H53N using ezTERM.
I wonder if there is any other solution (using this CSE-H53N module) to connect 2 LAN´s throw a serial line. E.g. changing firmeare, using some other sorftware, etc.
Best regards,

Diego


> Sollae Systems wrote:
> ------------------------------------
> Dear Diego,
>
> This is Khanh of Sollae Systems' Technical Support Team.
>
> Thank you for using our products.
>
> As your description, we have a great solution, called "Sollae Serial Line Router".
> With this solution you not only connect two PC but also connect two LAN network over RS-232 line.
> Please refer here for more information: http://www.eztcp.com/en/applications/slip_network.php
>
> This solution is only available on EZL-200F product.
>
> However, with CSE-H53N, you alse can establish your network topology as you discribed. But there are some limitations:
> - You need to use socket program on both PC to tranfer/receive data (this program is available on our softwares: ezManager, ezTerm).
>
> In this case, let's assume that your network topology: PC_1<-->CSE-H53N_1<-->CSE-H53N_1<-->PC_2.
> You need to config as follows:
> - RS-232 parameters are the same on two CSE-H53Ns
> - IP addresses of PC_1 and CSE-H53N_1 (called LAN_1) are different but the same network (eg. 192.168.0.1 and 192.168.0.2)
> - IP addresses of PC_2 and CSE-H53N_2 (called LAN_2)are different but the same network (eg. 192.168.0.1 and 192.168.0.2)
> - IP addresses of LAN_1 and LAN_2 are independent
> - Refer to page 16->18 of User Manual to config and create socket connection between PC and CSE-H53N (Not that instead of connecting RS-232 cable to PC, connect it to other CSE-H53N)
>
> You can get:
> - User Manual: http://www.eztcp.com/documents/manual/cseh53nen.pdf
> - ezManager and ezTerm: http://www.eztcp.com/en/download/utility.php
>
> In short, using EZL-200F is more flexible than CSE-H53N because it doesn't require any software.
>
> I hope the above is useful to you.
> Please feel free to contact me if you need any further information.
>
> Thank you,
>
> Best regards,
>
>
>
> > Diego wrote:
> > ------------------------------------
> > Hi friend,
> >
> > I have bought two TCP/Serial modules model CSE-H53N. I want to connect two PC´s, and make a serial tunnel, in accordance with the following architecture:
> >
> > ((PC))--<-UTP cable->--((ezTCP))-<--RS-232 cable-->-((ezTCP))-<--UTP cable-->-((PC))
> >
> > I wonder if you could bring me some technical assitance with the configuration of this two ezTCP modules. My e-mail is diegovidelasilva@hotmail.com
> >
> > Best Regards,
> >
> > Diego Videla
> >

Writer Diego Company DACC