한국어 English Chinese Russian
bannerbar
Support > Technical Support

Q&A



Your information is protected by SSL.
No. 1461 Re: Re: Re: Serial tunnel using ezTCP 2017-01-03

Hello Diego,

Unfortunately, There is no way to connect two LANs by using CSE-H53N.

Please feel free to contact me if you need any further information.

Best regards,

Khanh

> Diego wrote:
> ------------------------------------
> Dear Khanh,
>
> Thanks a lot for your information.
> I could connect and communicate both PC throw a serial line with two CSE-H53N using ezTERM.
> I wonder if there is any other solution (using this CSE-H53N module) to connect 2 LAN´s throw a serial line. E.g. changing firmeare, using some other sorftware, etc.
> Best regards,
>
> Diego
>
>
> > Sollae Systems wrote:
> > ------------------------------------
> > Dear Diego,
> >
> > This is Khanh of Sollae Systems' Technical Support Team.
> >
> > Thank you for using our products.
> >
> > As your description, we have a great solution, called "Sollae Serial Line Router".
> > With this solution you not only connect two PC but also connect two LAN network over RS-232 line.
> > Please refer here for more information: http://www.eztcp.com/en/applications/slip_network.php
> >
> > This solution is only available on EZL-200F product.
> >
> > However, with CSE-H53N, you alse can establish your network topology as you discribed. But there are some limitations:
> > - You need to use socket program on both PC to tranfer/receive data (this program is available on our softwares: ezManager, ezTerm).
> >
> > In this case, let's assume that your network topology: PC_1<-->CSE-H53N_1<-->CSE-H53N_1<-->PC_2.
> > You need to config as follows:
> > - RS-232 parameters are the same on two CSE-H53Ns
> > - IP addresses of PC_1 and CSE-H53N_1 (called LAN_1) are different but the same network (eg. 192.168.0.1 and 192.168.0.2)
> > - IP addresses of PC_2 and CSE-H53N_2 (called LAN_2)are different but the same network (eg. 192.168.0.1 and 192.168.0.2)
> > - IP addresses of LAN_1 and LAN_2 are independent
> > - Refer to page 16->18 of User Manual to config and create socket connection between PC and CSE-H53N (Not that instead of connecting RS-232 cable to PC, connect it to other CSE-H53N)
> >
> > You can get:
> > - User Manual: http://www.eztcp.com/documents/manual/cseh53nen.pdf
> > - ezManager and ezTerm: http://www.eztcp.com/en/download/utility.php
> >
> > In short, using EZL-200F is more flexible than CSE-H53N because it doesn't require any software.
> >
> > I hope the above is useful to you.
> > Please feel free to contact me if you need any further information.
> >
> > Thank you,
> >
> > Best regards,
> >
> >
> >
> > > Diego wrote:
> > > ------------------------------------
> > > Hi friend,
> > >
> > > I have bought two TCP/Serial modules model CSE-H53N. I want to connect two PC´s, and make a serial tunnel, in accordance with the following architecture:
> > >
> > > ((PC))--<-UTP cable->--((ezTCP))-<--RS-232 cable-->-((ezTCP))-<--UTP cable-->-((PC))
> > >
> > > I wonder if you could bring me some technical assitance with the configuration of this two ezTCP modules. My e-mail is diegovidelasilva@hotmail.com
> > >
> > > Best Regards,
> > >
> > > Diego Videla
> > >

Writer Sollae Systems Company