bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 1571	Re: Re: Re: Open socket to https site	2018-03-05

Dear Marc, Thank you for your information. For further analysis, could you please connect to a widely-known HTTPS server, send a GET request, and show us the screenshots of response message, in case you active and deactive SSL option. For example, you may connect to HTTPS server 54.235.185.199 (https://www.arduino.cc/), and send a HTTP GET request such as "GET /asciilogo.txt HTTP/1.1". Thank you very much for your understanding. Best Regards, > Anonymous wrote: > ------------------------------------ > I am using the ezTCP device as a client. > In the mean time I have changed the setting of our https server for not doing certificate sending and I am now able to create a connection with the server. > However when I send a HTTP GET request, I only receive the HTTP header, but not the requested data. When I do the same request on a PC to the same server, it is working (HTTP header + data) > > After some time when the server closes the connection, I get a "NO CARRIER" response from the module. > > If I do the same with SSL disabled and connect to the same server, it is working. > > Any idee what could be the cause of this? > > Marc > > > > Sollae Systems wrote: > > ------------------------------------ > > Dear Marc, > > > > We would like to make it more clearly about your scheme, whether you use ezTCP device as a client or server? Also, please make sure that you set the appropriate setting (IP address, port number, etc.) for your device. > > > > If your ezTCP device acts as a client and there is no problem with the device setting, for this issue, one possible reason is that in some cases, server may request a client certificate. > > If this situation occurs, ezTCP products do not support sending response to those requests. > > > > If you have any inquiry, please feel free to contact us. > > Thank you for your understanding. > > Best Regards, > > > > > > > Marc wrote: > > > ------------------------------------ > > > HI, > > > > > > I have CSE-M53N module and I am able to connect via a SSL socket as a client when I disable the CA checking on the server. > > > > > > But when I want to connect a socket to a https side (port 443) it is not succeeding. I think it has to something with the certificate checking. > > > > > > Could you tell me how I can connect with ssl to a standard https site on port 443? > > > > > > Regards, > > > Marc > > >

Writer	Sollae Systems	Company