bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 1613	Re: Re: Connection with Mitsubishi L-serie	2019-01-03

Good afternoon again, The state of the problem is, * Connection of the PC with the CSE-H21 (remote connected)is OK * Question: Can the USB Cabel from CSE-H21 to PLC L-serie be the problem (serial RS232/USB mini) Johan Lindeboom > Sollae Systems wrote: > ------------------------------------ > Dear Johan Lindeboom, > > Thank you for being our valued customer. > > As we understand, the connection should be like this: > PC <-- TCP/IP --> CSE-H21 <-- Serial --> PLC. > > To find out whether the problem happens in TCP/IP connection or in Serial connection, we would like to ask for more information. > > First, please make sure the serial configuration is set properly between the PLC and CSE-H21 device. > > There will be a TCP/IP connection between CSE-H21 and your PC. > We guess that your working scheme is similar to the one in the attached photo below. > (You are trying to connect CSE-H21 to the same serial software on your PC that you used to connect to PLC device previously) > > In that case, you may need to use ezVSP to connect CSE-H21 and your software on your PC. https://www.eztcp.com/en/download/ezvsp.php > ezVSP is a virtual serial port driver and TCP/IP socket program, distributed for free by Sollae Systems. (ezVSP User Manual: https://www.eztcp.com/en/download/pds_files/an_ezvsp_en.pdf) > > If you still can not find any problem with your setting, could you please send us the screenshot of Serial and TCP/IP setting on your CSE-H21, and also let us know the configuration for the interface in your PC/your PLC with CSE-H21? > > Thank you very much for your understanding. > Best Regards, > > > > > Johan Lindeboom wrote: > > ------------------------------------ > > Hello, > > > > I have a problem to connect a Mitsubishi PLC, type L02, to a CSE H21. > > The WAN connection online is ok. > > > > > > > > > > Former configuration with a Mitsubishi F-serie gave no problem. The PLC was then coupled using the official progamming cable (RS422)

Writer	Johan	Company	Teunis Industrietechniek