한국어 English Chinese Russian
bannerbar
Support > Technical Support

Q&A



Your information is protected by SSL.
No. 1615 Re: Re: Re: Re: Connection with Mitsubishi L-serie 2019-01-04

Good Morning,

The connection settings

Thanks for your fast respons


> Sollae Systems wrote:
> ------------------------------------
> Dear Johan Lindeboom,
>
> Yes, the problem may be in the USB cable.
> However, for further analysis, we still need more information about connection setting on each device in your working scheme.
>
> If possible, we can establish a TeamViewer session.
> You can set up a schedule and send your credentials (ID and password) to us via email support@eztcp.com.
> Our working time is from 9:00 to 18:00 in UTC+9 Time zone.
> Thank you for your understanding.
> Best Regards
>
>
> > Johan wrote:
> > ------------------------------------
> > Good afternoon again,
> >
> > The state of the problem is,
> > * Connection of the PC with the CSE-H21 (remote connected)is OK
> > * Question: Can the USB Cabel from CSE-H21 to PLC L-serie be the problem (serial RS232/USB mini)
> >
> > Johan Lindeboom
> >
> >
> > > Sollae Systems wrote:
> > > ------------------------------------
> > > Dear Johan Lindeboom,
> > >
> > > Thank you for being our valued customer.
> > >
> > > As we understand, the connection should be like this:
> > > PC <-- TCP/IP --> CSE-H21 <-- Serial --> PLC.
> > >
> > > To find out whether the problem happens in TCP/IP connection or in Serial connection, we would like to ask for more information.
> > >
> > > First, please make sure the serial configuration is set properly between the PLC and CSE-H21 device.
> > >
> > > There will be a TCP/IP connection between CSE-H21 and your PC.
> > > We guess that your working scheme is similar to the one in the attached photo below.
> > > (You are trying to connect CSE-H21 to the same serial software on your PC that you used to connect to PLC device previously)
> > >
> > > In that case, you may need to use ezVSP to connect CSE-H21 and your software on your PC. https://www.eztcp.com/en/download/ezvsp.php
> > > ezVSP is a virtual serial port driver and TCP/IP socket program, distributed for free by Sollae Systems. (ezVSP User Manual: https://www.eztcp.com/en/download/pds_files/an_ezvsp_en.pdf)
> > >
> > > If you still can not find any problem with your setting, could you please send us the screenshot of Serial and TCP/IP setting on your CSE-H21, and also let us know the configuration for the interface in your PC/your PLC with CSE-H21?
> > >
> > > Thank you very much for your understanding.
> > > Best Regards,
> > >
> > >
> > >
> > > > Johan Lindeboom wrote:
> > > > ------------------------------------
> > > > Hello,
> > > >
> > > > I have a problem to connect a Mitsubishi PLC, type L02, to a CSE H21.
> > > > The WAN connection online is ok.
> > > >
> > > >
> > > >
> > > >
> > > > Former configuration with a Mitsubishi F-serie gave no problem. The PLC was then coupled using the official progamming cable (RS422)
Attachment 20190104_Sollae H21 Instellingen 20-12-18(info).zip
Writer Johan Company Teunis Industrietechniek