No. 1668 | Re: Re: Re: Re: Communication to a CSE-M53N using controllogix PLC | 2019-05-15 | ||
---|---|---|---|---|
Hello, Thank you, we will try do just that. And the current architecture we want to make it work is: PLC <---Ethernet/IP---> CSE-M53N Which we suspect is not going to work. > Sollae Systems wrote: > ------------------------------------ > Dear Joaquin Juarez, > > Thank you for your information > > I am not clear about your network architecture. > > If i am correct, it should be: > PLC <----Serial-----> CSE-M53N <-----TCP/IP-----> PC (----TCP/IP---> ezVSP <----Virtual Serial---> OPC Server ) > > If so, you need to establish TCP connection between ezVSP and CSE-M53N. > Could you please send us the configuration of TCP connection on ezVSP? > > If possible, we can do a remote support via a remote software, which is similar to TeamViewer. > If possible, please contact us via email support@eztcp.com. Our working time is from 9:00AM to 6:00PM (GMT+9) > > > > > > Joaquin Juarez wrote: > > ------------------------------------ > > > > Hello, > > > > Thank you for your fast response. > > > > My goal is to see if I can communicate directly to the module using a PLC. > > > > -Architecture: > > Network Card 1756-EN2T (Ethernet/IP) connected to the CSE-M53N (Through a switch). > > System does not have a serial port. > > > > -Find the settings in the attached PDF. > > > > -I do not use any PC to transfer the data. I would be looking to do it with the PC. > > > > Now I might be jumping ahead, but in case my approach is wrong, would I need to do something like the following?: > > PLC --> PC (Running OPC Server and ezVSP) --> CSE-M53N > > > > Best regards > > Joaquin Juarez > > > > > Sollae Systems wrote: > > > ------------------------------------ > > > Hello Joaquin Juarez, > > > > > > Thank you for using our product. > > > > > > In order to find out the issue, could you please describe detail about: > > > - Your system architecture > > > - Setting of Serial Device > > > - Setting on CSE-M53 (network and serial setting) > > > - Which software do you use on PC to transfer data > > > ? > > > > > > Thank you, > > > Best regards, > > > > > > > > > > Joaquin Juarez wrote: > > > > ------------------------------------ > > > > Hello, > > > > > > > > I have a Display that makes use of the CSE-M53N, connected to a local network over ethernet. > > > > > > > > I have not been able to connect the PLC to this communication module. I am wondering if you have any prior example I could use. > > > > > > > > Best Regards |
Writer | Joaquin Juarez | Company | Callisto Integration |
|
|||