Q&A

Your information is protected by SSL.

No. 1796	Re: Re: Re: rs232 problem with csw-h80	2021-06-07

Dear K Van Der Werff, Thank you for the question, To modify settings of CSW-H80 via serial port, please follow the steps below: Step 1) Make CSW-H80 to enter Serial Configuration Mode You need to push the Function button on CSW-H80 for a moment (less than 1 sec). When CSW-H80 successfully enters Serial Configuration Mode, the STS, LINK, RXD, and TXD LEDs will blink simultaneously. You can refer to page 25, CSW-H80 User Manual https://www.eztcp.com/en/download/pds_files/cswh80en.pdf, Step 2) Connect CSW-H80 to ezManager Click the [Read] button on the [Serial] tab of ezManager. Note that, ezManager software only supports Windows OS, so please try to test with a PC that has Windows OS installed. If the problem still happens, please take the screenshot of ezManager that includes the error message and send us. Thank you very much. Best Regards > k van der werff wrote: > ------------------------------------ > I recently changed my wifi-settings in my home network. so I have to modify settings of cswh80 by serial port. I am using linux and I can run ezManager . When I do serial read of parameters I get : unknown response from the ezTCP(s), followed by long series of hex-codes. What can I do.