bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 564	Re: Re: CSW-H80 ATC	2010-07-15

Hi there, Thank you for replying. The system I want to establish is that I have data that will be transmitted through serial port onto the router, and I am wishing to transmit this data onto the internet wirelessly through any WIFI AP. So I believe that each time when I have a data packet arriving I will need to AT command the router for further tranmission (i.e commanding for the desired IP address.) As in which mode I should be in, I was actually wondering what operation mode as in normal mode? ISP mode? ..etc and which LEDs should be on so that I know that I am in the correct mode. Thank you and sorry for the trouble > Sollae Systems wrote: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Hello. > > This is technical support team of Sollae Systems. > If you want to manually control operation about connection/disconnection, ATC mode is suitable. > In the ATC mode, H80 is controlled by AT commands. > > However, if you want to operate H80 automatically, choose TCP Server (T2S) or TCP Client (COD) mode. > In these modes, H80 sends connection request to a remote server or listen to connection request from a remote client. > > Once TCP connection is (manually or automatically) established, data can be sent and received on both sides in any modes. > > If you want more specific examples, please let us know the system which you want to make. > > Have a nice day! > Thank you. > > > > > Mike wrote: > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Hi there, I am trying to establish WLAN connection with the CSW-H80 router. Just wondering which operating mode am i suppose to be in when i am giving out serial commands? And which LED lights should be on in this mode. Thanks

Writer	Sollae Systems	Company