Q&A

Your information is protected by SSL.

No. 646	Re: AdHoc connection - EZL80c	2012-02-14

Does 'Net isn't visible and the connection is aborted' mean that the SSID of EZL-80c does not connect on your PC? In this case, you have to check your PC as follows. 1. Even though all the parameters are correct, if you couldn’t get the ad-hoc link with our products, please check that your devices’ Wi-Fi adapter. Please check the link, too. http://blog.eztcp.com/ensollae/54 2. if you test at one channel, please test at another channel. It change on ezSerialConfig. If you have another questions, feel free to contact us. Have a nice day. Thank you. > Dane wrote: > ------------------------------------ > I use a EZL-80c module and create an SSID in AdHoc Mode. > This is possible but after a few seconds, the net isn't visible anymore and the connection is aborted. After this happend, a restart nor reset makes the network visible again and it`s not possible to establish a connection. However, after a few hours without supply the net is visible. but only for a few seconds. > i tried different settings and modes, but without success. > > can anybody help me?