한국어 English Chinese Russian
bannerbar
Support > Technical Support

Q&A



Your information is protected by SSL.
No. 650 Re: Re: Re: Re: Re: AdHoc connection - EZL80c 2012-02-16

I am afraid but we can’t get the CF card in Korea.
So we can’t test it.
And the EZL-80c was already discontinued.

So I recommend you the CSW-M85 wireless module.
CSW-M85

If you are in Germany, contact the Germany distributor.
The Germany distributor information is followed:

ELEKTRONIKLADEN | ELMICRO
http://www.elektronikladen.de


> Dane wrote:
> ------------------------------------
>
> No, when i restart the EZL-80c module, the net isn'st visible anymore. I have to wait a long time without power supply on it, before connection is possible again.
>
> I use WinXP with a Ralink RT2500 Wlan card (PC) and a D-Link DCF-660W CF-Card (EZL-80c module).
>
>
>
>
>
> > Sollae Systems wrote:
> > ------------------------------------
> >
> > Hello again.
> >
> > when you restart PC, SSID isn'st visible on PC?
> > or when you restart EZl-80c ?
> >
> > if you restart PC, and using the Windows 7/vista,
> > check the 'souto connection to adhoc's.
> >
> > if the problem is not solve, tell me your OS and WLAN chipsets.
> > Have a nice day.
> > Thank you.
> >
> >
> >
> > > Dane wrote:
> > > ------------------------------------
> > > Thanks.
> > > updating the driver solved the problem with the abortion of the connection. Unfortunately, after a restart it'ss not possible to connect again, the SSID isn'st visible either.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > > Sollae Systems wrote:
> > > > ------------------------------------
> > > > Does 'sNet isn'st visible and the connection is aborted's mean that the SSID of EZL-80c does not connect on your PC?
> > > >
> > > > In this case, you have to check your PC as follows.
> > > >
> > > > 1. Even though all the parameters are correct, if you couldn’t get the ad-hoc link with our products, please check that your devices’ Wi-Fi adapter.
> > > > Please check the link, too.
> > > > http://blog.eztcp.com/ensollae/54
> > > > 2. if you test at one channel, please test at another channel. It change on ezSerialConfig.
> > > >
> > > > If you have another questions, feel free to contact us.
> > > > Have a nice day.
> > > > Thank you.
> > > >
> > > >
> > > > > Dane wrote:
> > > > > ------------------------------------
> > > > > I use a EZL-80c module and create an SSID in AdHoc Mode.
> > > > > This is possible but after a few seconds, the net isn'st visible anymore and the connection is aborted. After this happend, a restart nor reset makes the network visible again and it`s not possible to establish a connection. However, after a few hours without supply the net is visible. but only for a few seconds.
> > > > > i tried different settings and modes, but without success.
> > > > >
> > > > > can anybody help me?
Writer Sollae Systems Company