bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 715	Re: Re: Re: impossible to manage CIE M10 through internet	2013-01-07

In your case, CSE-M10 can be used as a remote switch for the pump and a DDNS setting does not necessary on the module as you think. There are two main options for controlling the output port. 1. HTTP This is an easy and simple way. You can control output ports of CIE-M10. Checking WEP(HTTP) option allows using this way. 2. Modbus/TCP Modbus/TCP communication contains of Master and Slaves. Generally, master is set to active connection and slave is set to passive connection. In your case, setting CIE-M10 to Slave and passive connection will be fine. Note that the communication mode such as COD, T2S, and U2S are not related with both HTTP and Modbus/TCP. Have a nice day. Thank you. > Laurent (FRA) wrote: > ------------------------------------ > Hello > You understood well. > In my configuration, I have a CIE M10 which pilot a pump (output). This module is behind an adsl router. In this router is configured the DDNS (No-IP.org). Perhaps it is not necessary to configure the DDNS in the module. > What communication mode is ok in my case: cod, t2s, u2s... Master or slave and passive or active connection. > Thank you > Have a nice day > > > > Sollae Systems wrote: > > ------------------------------------ > > I don't understand your problem exactly. > > > > But I think that you might want to access in order to configure the CIE-M10 from the other network with DNS/DDNS service. > > When the CIE-M10 IP address is dynamic you should use DDNS service in this case. > > > > You can access the CIE-M10 in the IP tab by inputting the hostname(or IP address) of the CIE-M10 and port number UDP 50005 by the ezManager. > > > > If I misunderstand your question, please let me know and describe more precisely. > > > > Have a nice day. > > > > > laurent wrote: > > > ------------------------------------ > > > Hello > > > I want to manage a CIE M10 through internet but it doesn't work. I have a domain name and I use the port number 80. When I use TCP ezmanager, on the page IP I put my domain name in the "local IP address" with the 50005 port a window appears with the public IP address and nothing else. An other window tell me that the module is unreachable. My firewall is disable. Is there a particular port to use or a special configuration on ezmanager to manage my module. > > > Thanks

Writer	Sollae Systems	Company