FAQ

Category : how to

EZL-50 / 60

There is specific firmware for each communication mode in case of EZL-50 and EZL-60.
Therefore, you should upload the each firmware to change the communication mode.

How can I change the communication mode of EZL-50 and EZL-60?

- You should download a specific firmware for each communication mode.
- Please check EZL-50’s MAC Address label before upload it.
- You should upload firmware version 2.0a or higher for EZL-50R.
- Other EZL-50 (for example EZL-50A) should download firmware version 1.x.
- If you upload a wrong firmware, EZL-50 does not operates.

Rest of ezTCP/LAN products

Just select the communication mode by setting the [Communication Mode] field in configuration or management software (ezConfig, ezManager and etc.)

---

See also

FAQ No.71 What does the communication mode(ezTCP Mode) mean?
FAQ No.169 What is the operation mode? How can I enter each operation mode?
FAQ No.55 What is Server(T2S) mode?
FAQ No.53 What is AT command(ATC) mode?
FAQ No.54 What is Client(COD) mode?
FAQ No.52 What is UDP(U2S) mode?

Related Products

[ Ethernet-Module ] CSE-M53, CSE-M32, EZL-50L, EZL-50M, EZL-410
[ Ethernet-Module with RJ45 ] CSE-M73, EZL-70
[ Ethernet-Board ] EZL-60L, EZL-60M, CSE-B63
[ Ethernet-External ] CSE-H55, CSE-H53, CSE-H25, CSE-H20, CSE-H21, EZL-200L, EZL-200F, EZL-400S
[ Wireless-External ] EZL-300S, CSW-H80
[ Wireless-Module ] CSE-M83
[ I/O ] CIE-H10, CIE-M10