CSE-B63G / RS232/RS485 Ethernet Module

Product Specification Download Ordering Info

CSE-B63G is an embedded RS232/RS485 to Ethernet board which CSE-M53G is integrated. CSE-B63G is offered with an evaluation board and it becomes much easier to embed CSE-M53G in your system by getting rid of the time burden to build an additional circuit on your own. The basic concept of this RS232/RS485 to Ethernet board is quickly and easily adding networking capabilities to your serial equipment, which helps you remotely control and monitor them from anywhere in the world. As well as general functions, it provides developed features such as security options (SSL3.0/TLS1.0, IP filtering, Password), a separator for packet fragmentation, and particularly IPv4/IPv6 dual stacks that make you be prepared for moving forward to next generation Internet protocol, IPv6.

Thanks to these benefits, CSE-B63G can be used for various industrial applications: RFID System, Remote Monitoring System, Extending distance between two devices through the LAN, etc.

Learn more about serial networking solution >

Features

High speed RS232 x 1 (up to 921.6Kbps)
(In case of using Xon/Xoff, the maximum data rate of the UART is limited to 230.4Kbps)
RS485 x 1 (230.4Kbps, DB9-M interfaced)
Compact size (80mm x 44mm x 17mm)
SSL security protocol
Separator settings for packet fragmentation
IPv4/IPv6 dual stack
Flexible configuration and network communication by 'AT Commands' (patent)
Virtual COM Port Redirector for Windows OS (ezVSP)

* The above information is subject to change and Sollae Systems is not responsible for any changes.
Serial Physical Interface
Serial Interface	RS232 - RXD, TXD, RTS, CTS, GND
Serial Interface	RS485 - TRX+, TRX-, GND(Built-in 3.9Kohm biasing resistance)
Connector	9 pin D-sub male

Serial Port Properties
Baudrate	RS232 - 300 bps ~ 921,600 bps
Baudrate	RS485 - 300 bps ~ 230,400 bps
Data Bits	8bits, 7bits with parity
Parity	None, Even, Odd, Mark, Space
Stop Bit	1, 2(※ a single idle bit is automatically added to every stop bit by the MCU function)

Network Physical Interface
Network Interface	10Base-T/100Base-TX Ethernet
	Ethernet Speed Auto Sense
	1:1 or Cross-over Cable Auto Sense

Software Functions
Protocols	IPv4/IPv6 dual stack, ICMPv6/TCPv6/UDPv6
	TCP, UDP, IP, ICMP, ARP, TELNET
	DHCP, PPPoE, DNS, DDNS
Security	SSL(Secure Socket Layer)
	IP & MAC filtering - Restrict host or network
	Password for Configuring
Communication Mode	TCP Server(T2S)
	TCP Client(COD)
	TCP Server/Client with AT Command(ATC) - Patent
	UDP Mode(U2S)
Additional Functions	Separator settings for packet fragmentation
	TCP Server/Client Mode
	Sending MAC address Option

Indicators(LEDs)
PWR	Red
Serial TXD	Green
Serial RXD	Green
Serial RTS	Green
Serial CTS	Green
TCP	TCP Connection Indicator(Green)
STS	The Current Status(Green)
Ethernet Link	Green
Ethernet RXD	Green
Ethernet TXD	Green

Supplementary Software
ezManager	Configuration Tool for Windows
ezVSP	Serial to Network Virtual Driver for Windows
ezTerm	Simple TCP/IP Communication Test Tool

Dimension
Size	80mm x 45mm x 17mm

Operating Environment
Input Voltage	DC 5V±0.5V
Current Consumption	133mA(100M Ethernet), 173mA(10M Ethernet)
Operating Temperature	-40℃ ~ +85℃
Storage Temperature	-40℃ ~ +85℃

Technical Documents

BASIC
1	CSE-B63G DataSheet
2	CSE-M53G User Manual
3	CSE-B63G Declaration of RoHS Compliance
4	IP address and ezTCP
TCP
1	IP Change Notification(DDNS)
2	Sending MAC Address function
3	TCP Server/Client mode
4	Separator function
SERIAL
1	Serial Management protocol
2	Telnet COM Port Control Option
3	Serial cable datasheet
4	AT Command mode - ATC
FAQ
1	CSE-B63G Frequently Asked Questions