Sollae Systems’ Remote I/O Controller monitors and controls information of digital input port and digital output port.
This process of our remote I/O controller is done with TCP/IP through Ethernet port.
Input and output ports can be monitored and controlled via Modbus/TCP and HTTP.
Also, when you set up a value to input port for output port by using basic logical function, which is called Macro mode, each set of input and output port can be operate independently.
So, when you set up two units of Sollae Systems’ I/O controller as one pair of Master and Slave, you may use them like an Internet switch.
Besides, when you modify one unit of CIE-H10 and several unit of CIE-H12, the system can work as two-way remote controller. CIE-H10 has 8 of input and output ports and CIE-H12 has 1 port.
When you set CIE-H10 to work as Modbus/TCP Slave, and CIE-H12 as Modbus/TCP Master, you can operate a system such as 1:N Internet switch.
For example, connect a physical switch line with input port of CIE-H10, and connect anything that you want to turn on and off from a remote site such as fan, air conditioner, lights in factory with output port of CIE-H12.
As long as there is internet connection on both sites, you can easily turn on and off at anytime and from anywhere.
Other than the example above, Remote I/O controller can be applied to power, motor, or actuator control system and remote PC on/off system.
#901-907, 869, Gyeongwon-daero, Michuhol-gu, Incheon 22134, Korea (Republic Of)
Tel. +82 32 245 2323 | Fax. +82 32 245 2327 | Email. sales@ezTCP.com
