CIE-H10G is a remote I/O gateway equipped with 8 digital input ports, 8 digital output ports, an RS-232 and an Ethernet interface.
Each digital input port is linked to a photocoupler. The input port can monitor the equipment's ON/OFF state (maximum is 24VDC).
Each digital output port is linked to a relay. Apart from ON/OFF control, the digital output port can also be controlled to generate a pulse.
CIE-H10G supports Modbus TCP protocol. You can control/monitor equipment/sensors located in remote places from a PC software, mobile app, HMI, or other Modbus TCP devices. You can use our free software/app called ModMap or any software/app that supports Modbus TCP.
CIE-H10G is also equipped with an embedded web server with a preloaded web page, so you can use any web browser on a PC/smartphone to access the web page to control/monitor equipment/sensors. The web page is customizable so you can easily change the web UI if needed.
CIE-H10G allows each digital output port to be automatically controlled by a logic formula of digital input and output ports.
Especially, CIE-H10G can connect directly to multiple CIE-H12G, CIE-H14G, and/or other CIE-H10G to form an I/O system called Internet Switch. The system allows the output port of a device to be controlled by input ports of other devices, and vice versa, via the Internet.
CIE-H10G allows up to eight TCP connections simultaneously, enabling to monitor sensors from different HMI devices/software/apps at the same time.
Besides, CIE-H10G can work simultaneously as an RS232 to Ethernet converter while serving I/O operations.
| Digital Input Port | |
| Number of Ports | 8 |
|---|---|
| Interface | Isolated by Photo-coupler (WET contact) |
| Electric Parameter | ON - over DC 4.5V, OFF - under DC 1.2V |
| Maximum Input Voltage | DC 24V |
| Digital Output Port | |
| Number of Ports | 8 |
| Interface | Isolated by Relays(Type A: ON - short, OFF - open) |
| Relay Capacity | 5A (DC 28V, resistive load) |
| Serial Physical Interface | |
| Serial Interface | 1 x RS232 Port |
| RXD, TXD, RTS,CTS, DTR, DSR, GND, DCD, RI | |
| ± 15KV ESD Protection | |
| Connector | DSUB 9-pin Male |
| Serial Port Property | |
| Data Rate | 300bps ~ 230,400bps |
| Data Bits | 8 bits, 7 bits with parity |
| Parity | None, Even, Odd, Mark, Space |
| Stop Bit | 1, 2(※ a single idle bit is automatically added to every stop bit by the MCU function) |
| Flow control | None, RTS/CTS, Xon/Xoff |
| Ethernet Port | |
| Network Interface | 10Base-T/100Base-TX Ethernet(RJ45) |
| Ethernet Speed Auto Sense | |
| 1:1 or Cross-over Cable Auto Sense | |
| Software Functions | |
| Protocols | Modbus/TCP, HTTP, TCP, UDP, IPv4/IPv6 dual stack, ICMPv6/TCPv6/UDPv6 |
| ICMP, ARP, DHCP, PPPoE, DNS, DDNS(Dynamic DNS) | |
| Telnet, Telnet COM Port Control Option (RFC 2217) | |
| Security | IP & MAC filtering - Restrict host or network |
| Password for Configuring | |
| I/O Control Methods | Modbus/TCP, HTTP, Serialized Modbus/TCP, Macro |
| Serial-Ethernet Conversion Modes | TCP Server, TCP Client, UDP, ATC |
| Indicators(LEDs) | |
| System LED | PWR, STS, LINK, RXD, TXD |
| I/O Port LED | DI x 8, DO x 8 |
| Supplementary Software | |
| ezManager | Configuration tool for Windows |
| ModMap | Management tool of I/O controllers for Windows |
| Dimension | |
| Size | 153mm x 126mm x 32mm |
| Weight | Approximately 475g |
| Operating Environment | |
| Input Voltage | DC 5V |
| Current Consumption | 450mA typical |
| Operating Temperature | -40℃ ~ +70℃ |
| Storage Temperature | -40℃ ~ +85℃ |
| Certificate | |
| KC | Registration(KN 32, KN 35) |
| CE | EMC 2014/30/EU, RoHS 2011/65/EU |
| Part Number | Description | Note |
|---|---|---|
| CIE-H10G-BO | 
CIE-H10G |
|
| Optional Accessories | Description | Note |
| DCA-H10 | 
Dry Contact Adapter (DCA) |
|
| MOUNTER | 
Datasheet |
|
| SC | 
Serial cable datasheet |
#901-907, 869, Gyeongwon-daero, Michuhol-gu, Incheon 22134, Korea (Republic Of)
Tel. +82 32 245 2323 | Fax. +82 32 245 2327 | Email. sales@ezTCP.com
