SMG-5420 is an industrial Modbus Gateway that converts and routes Modbus data between the serial line and Modbus/TCP.
This can help to communicate between Modbus master (or slave) of serial line and Modbus slave (or master) of network.
SMG-5420 provides 10/100Mbps Ethernet and RS422/RS485 serial port.
The SMG-5420 is the ideal solution for integrating RS422/RS485 Modbus RTU/ASCII sensors into SCADA systems. It ensures accurate data readings and seamless data transmission via Modbus TCP.
Serial Physical Interface | |
Serial Interface | RS422/RS485 |
---|---|
TX+, TX-, RX+, RX-, GND with embedded 3.9K biasing resistors and TVS TRX+, TRX-, GND with embedded 3.9K biasing resistors and TVS | |
Connector | 3.5mm Pitch Terminal Block |
Serial Port Property | |
Baudrate | 1,200bps ~ 230,400bps |
Data Bits | 8bits, 7bits with Parity |
Parity | None, Even, Odd, Mark, Space |
Stop Bit | 1, 2 |
Network Physical Interface | |
Network Interface | 10Base-T/100Base-TX Ethernet(RJ45) |
Ethernet Speed Auto Sense | |
1:1 or Cross-over Cable Auto Sense | |
Software Functions | |
Protocols | IPv4/IPv6 dual stack |
TCP, UDP, ICMP, DHCP, Modbus/TCP, mDNS | |
Modbus/RTU, Modbus/ASCII | |
Security | Password |
Indicators(LEDs) | |
PWR | Red |
RUN | Yellow |
LINK | Green |
MRX | Green |
MTX | Green |
STX | Green |
SRX | Green |
Management | |
spFinder | Configuration and Monitoring Tool through Network |
Dimension | |
Size | 94mm x 57mm x 24mm |
Operating Environment | |
Input Voltage | DC 5V±0.5V |
Protection | Reverse Voltage Protection / Surge Protection |
Current Consumption | 145mA typical |
Operating Temperature | -40℃ ~ +85℃ |
Storage Temperature | -40℃ ~ +85℃ |
Certificate | |
KC | Registration(KN 32, KN 35) |
CE | EMC 2014/30/EU, RoHS 2011/65/EU |
FCC | FCC Part 15 Subpart B, Class A |
BASIC | |
---|---|
1 | SMG-5420 DataSheet |
2 | SMG-5420 User Manual |
3 | CE Сertificate |
4 | FCC Сertificate |
5 | Declaration of RoHS Compliance |